Cart (0)
Your cart is empty
Delivered between and
Complete Your Installation
Shade Sail Fitting Kit
8-Piece Stainless Steel
4 interest-free payments of A$34.75
with Afterpay.
Product Details
Clean white shade, fixed between four anchor points and easy to assemble. The Ripstop is the most immediately deployable shade sail in the Shadelys range: a white rectangular canopy in PU coated oxford fabric that goes up without a setup sequence, in whichever size suits your outdoor space. Fixed rather than portable, architectural rather than furniture, and available in multiple sizes to suit outdoor areas of different scales.
The PU coated oxford fabric is water resistant, mould-resistant and UV-protective. The coating handles light to moderate rainfall without saturating, and resists the mould and mildew that Australian humidity promotes in untreated outdoor fabrics across an outdoor season. The white canopy creates a bright, neutral appearance, while the UV-protective fabric helps reduce direct UV exposure beneath the shaded area.
Stainless steel fasteners at each corner provide the fixing points for the included PE ropes. Once the sail is anchored between four fixed points — structurally suitable fixed anchor points, such as purpose-built posts, appropriate wall fixings or suitable structural beams — the ropes connect the corners to the mounting hardware with no additional preparation required. For precise tensioning and a clean, professional installation finish, pairing the Ripstop with a compatible stainless steel fitting kit is recommended.
The Ripstop is available in multiple sizes — select the right coverage for your outdoor space using the size options above. The rectangular shape suits long tables and linear outdoor spaces where a triangular sail leaves corners exposed and a square sail overhangs the edges unevenly. Four corner anchor points allow the sail to be tensioned symmetrically across its full span for a flat, taut profile.
The included PE ropes connect each sail corner to the anchor hardware at each fixing point. For best results, install two corners of the sail higher than the other two — this creates a natural slope across the canopy that allows rainwater to run off rather than pooling at the centre of the fabric.
Wall and post mounting hardware — pad eyes, carabiners and turnbuckles — is not included with the sail. The Shade Sail Fitting Kit Standard (4-point, stainless steel) is the compatible option for this rectangular sail. To compare colours within the same rectangular format, see the Dacron in anthracite and the Spinnaker in cream.
White is the outdoor colour that connects most naturally to the Australian coastal and contemporary aesthetic — white render, white timber cladding, white steel frames. A white shade sail extends that palette overhead, completing the visual logic of a well-resolved outdoor space rather than introducing a contrasting element into it. Against a blue sky it disappears into the light; against a dark timber fence or a green garden it reads as a clean, graphic plane; above a pool it amplifies the sense of space and brightness that pool areas are designed to create.
The white canopy creates a bright, neutral appearance that suits a wide range of outdoor settings. The PU-coated Oxford fabric is UV-protective, water-resistant and mould-resistant, providing a practical shade solution for patios, gardens, poolside areas and other outdoor spaces.
Rectangular shade sail, multiple sizes available. PU coated 100% polyester oxford fabric, white. UV-protective, water resistant, mould-resistant. Stainless steel fasteners at all 4 corners. PE ropes included. Easy to assemble. Mounting hardware not included — see the Shade Sail Fitting Kit Standard for compatible 4-point stainless steel hardware. For best water runoff, install two corners higher than the other two.
Specifications, Assembly & Care
Technical Specifications
Size & Shape
Rectangular (various sizes available)
Fabric
Polyester Oxford fabric with PU coating
Water Resistance
Water-resistant
UV Protection
UV-protective
Mould Resistance
Mould-resistant
Corner Fasteners
Stainless steel triangular fasteners at each corner
Ropes Included
PE ropes included
Assembly
Easy to assemble
Installation and Maintenance
Shade sails can be installed using the supplied instructions and included PE ropes. Identify your anchor points — posts, walls, trees or any solid structure — and secure the stainless steel corner fittings at each fixing point using compatible mounting hardware. Wall and post mounting hardware is not included with the sail.
Install two corners of the sail higher than the others to create a slope across the canopy — this allows rainwater to run off rather than pooling at the centre of the fabric. Ensure all anchor points are solid and capable of bearing the tension load before opening the sail fully.
The sail is not windproof. Remove or furl the sail during strong or gusty winds and whenever it is left unattended for extended periods.
The PU coated polyester fabric can be cleaned using a soft, damp cloth with mild soap. Allow the sail to dry completely before folding or storing. When not in use for extended periods — particularly through winter — remove the sail from its fixings, fold it clean and dry, and store it under cover where possible.
Delivery, Returns and Warranty
Delivery:
Each order is prepared and dispatched by our team within 24 to 48 hours (excluding weekends and public holidays). Delivery then takes 4 to 6 business days, depending on your location and the delivery method selected.
The estimated total delivery time is therefore 5 to 8 business days.
Returns:
You have 14 days from receipt to return your order to us. It must be in perfect condition, unused and in its original packaging. For more information, please see our Return and Refund Policy.
Need Help Choosing?
Our team is available from Monday to Friday, 9am to 6pm (excluding weekends and public holidays).
Email: info@shadelys.com
Phone: +61 2 5119 4874
14-Day Returns
You have 14 days to change your mind and arrange an exchange or a refund.
Clear Delivery Information
Estimated delivery timeframes shown before purchase
Secure Checkout
Payments processed securely
Customer Support
Help before and after your purchase
THE ART OF SHADE
PU Coated Oxford Fabric
UV-resistant, water resistant and mould-proof PU coated polyester fabric. Install two corners higher than the others to allow water runoff. Remove the sail during strong or gusty winds and whenever it is left unattended.
How to Install your Shade Sail
STEP 1
Plan your anchor points and select your hardware
Measure the area you want to cover and mark your anchor points on walls, posts or structures before purchasing. The number of anchor points matches the number of corners on your sail — three for a triangular sail, four for a rectangular sail. Each anchor point requires a pad eye, a carabiner and a turnbuckle.
When planning your installation, ensure at least two anchor points are set higher than the others to create a slope across the canopy. This slope — roughly 25% between the highest and lowest fixing points — allows rainwater to run off efficiently rather than pooling at the centre of the fabric.
STEP 2
Set tension and fix the corners
Anchor points must always align with the diagonal of the sail — for rectangular sails, one per corner; for triangular sails, one per point along the median lines. Allow a minimum of 45cm of clearance between each sail corner and its anchor point for adequate tensioning distance. The larger the sail, the more tensioning distance you should allow.
Once installed, the sail dimensions may vary slightly from the stated size due to fabric elasticity and the tension applied. This is normal and does not affect performance.
Need help?
Our team is available to assist you Monday to Friday, 9 am to 6 pm (excluding weekends and public holidays).
Frequently Asked Questions
How do I install a shade sail safely?
Use galvanised steel or aluminium posts, or fix to existing solid masonry walls and structural timber. Ensure every anchor point — whether a post, wall bracket or beam — is strong enough to bear the combined tension load of the sail in normal outdoor conditions. Stainless steel hardware throughout the fixing chain (pad eyes, carabiners, turnbuckles and ropes) is strongly recommended for Australian outdoor environments, particularly in coastal areas where other metals corrode rapidly.
Never fix a shade sail to flimsy fencing, guttering or structures that are not designed to carry a load. When in doubt, consult a qualified installer or builder before proceeding.
How do I choose the right shade sail colour?
All shade sails in the Shadelys range are available in multiple colours — choose the tone that best suits the furniture, flooring and finishes already present in your outdoor space.
Cream and white tones create a bright, open atmosphere and reflect some overhead heat, keeping the space beneath the sail cooler on the hottest days. Anthracite absorbs more light, creating a deeper, more defined shade that reduces glare effectively. As a general rule, darker tones appear to cast denser shade than lighter alternatives of the same fabric and size.
How do I choose the right size shade sail?
The right size depends on three factors: the area you want to cover, the distance between your available anchor points, and the shape of the space. Measure the zone you want to shade, then allow for the tensioning distance at each corner — a minimum of 45cm between each sail corner and its fixing point.
Rectangular sails suit long, linear spaces such as alfresco dining areas and pool decks. Triangular sails suit corner installations, L-shaped spaces and areas where one anchor point can be set significantly higher than the others to create a dramatic diagonal plane. All sails in the Shadelys range are available in multiple sizes — select your preferred size using the options on each product page.
Our sizing guide explains how to account for anchor offset and installation pitch when choosing a shade sail size.
Can I install a shade sail without drilling into walls?
Yes, in some situations. If drilling into walls is not possible, freestanding galvanised or powder-coated steel posts set into the ground or into weighted post bases are the most common alternative. Ensure any post used is rated to bear the tension load of the sail.
Clip-based or adhesive fixing methods are generally not adequate for shade sails, which carry significant tension and wind load in outdoor conditions. For a secure, long-term installation, mechanical fixings anchored into solid structures are always recommended.
What is PU coated oxford fabric?
PU (polyurethane) coated oxford fabric is a reinforced woven polyester with a polyurethane coating applied to one or both sides of the fabric. The coating makes the fabric water resistant, mould-proof and UV-protective — more durable and weather-resistant than standard uncoated polyester canopy fabric. All shade sails in the Shadelys range are made from PU coated oxford fabric for long-term outdoor performance in the Australian climate.
Are shade sails weather resistant?
Yes. All shade sails in the Shadelys range are made from UV-resistant, water resistant and mould-proof PU coated oxford fabric, designed to withstand normal Australian outdoor conditions across multiple seasons.
The fabric handles light to moderate rainfall without saturating. It is not fully waterproof under prolonged heavy rainfall — treating the fabric with a waterproofing spray at the start of each season adds an additional layer of protection where required.
Remove or furl the sail during strong winds, storms or extended periods of non-use. Storing the sail clean, dry and under cover through winter will significantly extend its service life.
What payment methods do you accept?
We accept secure payments via Afterpay, PayPal, Apple Pay and credit cards: Visa, Mastercard, Maestro and American Express. All transactions are encrypted and secured through our payment partner to ensure your data is protected
What should I do if my order arrives damaged, incomplete or incorrect?
If your order arrives damaged, incomplete or incorrect, please contact our customer service team and include clear photos of the issue. We will review your request and assist you in accordance with our return and refund policy.
Complete Your Installation
Don't forget the hardware to hang it. All shade sails require pad eyes, carabiners and turnbuckles at each anchor point — these are not included with the sail. The Shade Sail Fitting Kit Standard suits rectangular sails with four anchor points; the Shade Sail Fitting Kit Large suits triangular sails with three anchor points.
You Might Also Like These Models:
