Cantilever Umbrella 3x3m Anthracite – Vented Double Canopy | Levant

Dark anthracite. The first thing you notice about the Levant is its tone — a deep, warm charcoal pulled tight above the table, absorbing the glare that bounces off stone paving and polished concrete rather than throwing it back at you. This anthracite cantilever umbrella doesn't blend into the background: it plants nine square metres of dense, defined shade above your outdoor setting like a rooftop of its own.

The rectangular 70 x 50 mm powder-coated aluminium mast rises at an angle from the cross base, leaving the area beneath the canopy clear. Eight aluminium ribs support the double-top vented canopy. The upper opening allows some air and heat to pass through the canopy.

Set above a teak dining table, a concrete-topped outdoor kitchen or a contemporary lounge setting, the Levant reads as an architectural element rather than an accessory. The anthracite canopy draws in light rather than reflecting it, casting a deep, even shade that makes the hours between noon and three genuinely liveable outdoors.

A 3x3m anthracite cantilever umbrella for contemporary outdoor spaces

The Levant opens to a square 300x300cm canopy — a full 9m² of shade. That coverage shelters a six-to-eight-seat dining table or a complete outdoor lounge setting. The UV-resistant polyester canopy is designed to help limit fading caused by normal outdoor exposure. As with any outdoor fabric, its appearance may gradually change over time depending on sunlight, weather conditions, use and maintenance.

An ergonomic crank handle opens and closes the canopy, while 360° mast rotation lets you track the sun across the sky without shifting your furniture. The canopy also tilts to block low-angle light. No centre pole cutting across the space, no shadow interrupted by a post — the cantilever design keeps your entire alfresco area open.

300 x 300 cm
9m² of shade | 258cm overall height

Need more coverage for a larger setting? Discover the Levant XL 3x4m for 12m² of shade in the same anthracite tone. To compare colours within the same 3x3m square structure, browse our 3m Cantilever Umbrellas collection, which also includes the Sirocco in ivory and the Tramontane in taupe. A compatible ballast or anchoring system is required for installation. Explore our Umbrella Bases & Weights collection and check the cross-base dimensions before ordering.

A cantilever umbrella built for bold, modern outdoor settings

Anthracite earns its place wherever lighter tones would look tired within a season. On a polished concrete terrace in an inner-city courtyard, it draws a clean, deliberate line; above a hardwood table in a sheltered suburban backyard, it anchors the setting without competing with the materials around it.

The rectangular 70 x 50 mm powder-coated aluminium mast supports the canopy structure. The upper vent allows some air and heat to pass through the double-top canopy. No tested wind-speed rating is stated for this product. Close the umbrella during strong or gusty winds and whenever it is left unattended.

At a glance

Overall height 258 cm, 100 x 100 cm aluminium cross base included and powder-coated frame. The components required to assemble the umbrella and included cross base are supplied. A compatible ballast or anchoring system is required and sold separately.

Some products may be shipped directly from our partner vidaXL's warehouses.

The cantilever umbrella can be assembled in under 30 minutes using the supplied instructions. Place the aluminium cross base on a flat, stable surface, secure the mast in position, then open the canopy using the crank handle.

The umbrella must be installed with a compatible ballast or anchoring system fitted to the included 100 x 100 cm cross base. The Holdfast Base Weight Kit is designed for compatible cross bases and provides up to approximately 100 kg of added ballast when all four plates are fully filled with dry sand. The kit is sold separately.

Ballast does not make the umbrella windproof. Close the canopy during strong or gusty winds and whenever the umbrella is left unattended.

The polyester canopy with PA coating can be cleaned using a soft, damp cloth. Allow it to dry completely before closing or storing the umbrella. When not in use for extended periods, close the canopy and protect the umbrella with a suitable outdoor cover where possible.